If you want one of our caddy systems but don't have a seat pedestal solution or track installed in your boat, we have you covered! You can add one of our direct mount base plates almost anywhere in your boat. This allows you to use any of our track mount caddy systems and track mount risers, without the need for a track system. Use the provided stainless locking thumb screws and allen wrench to quickly add/remove your caddy system as needed. To mate properly, we have to remove the threading from the caddy system or riser to fully mate tight with the base plate. Once this is done, the unit cannot be used in a track system. If you order this mounting plate with any of our track mount units, we will remove the threading here and ship the plates ready to use. If you would like to use this plate with an existing track mount caddy system that you purchased from us prior, you will have to drill out the threads with a 1/4'' drill bit on the existing unit. The direct mount base plates are shipped with locking stainless thumb screws, an allen wrench, mounting hardware and instructions. If you are using the direct mount plate with one of our tall or extra tall risers, it's recommended that you bolt on the direct mount plate, rather than using the provided stainless screws. If you have to remove the threads from your existing track mount unit, the included instructions will explain and cover it clearly with pictures and detailed text. Sold per each.
Click HERE to see a video of this product.
Pictures show a caddy system and riser installed for reference. You are only receiving the plate and hardware as noted above.